vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Kickdown Cable, Replace > < Fluid Pump Valve Body Assembly

Astra

Selector Lever Cable, Adjust

 

Remove cover (1) from console and lift off over selector lever.

 

 

Object Number: 2381022 Size: DEFAULT

 

 

Remove shift gate (1) with shift slot cover (2) and lift off over selector lever.

 

Note:    Before removing parts, disconnect plug connections for shift gate lighting.

 

 

 

Object Number: 2381023 Size: DEFAULT

 

 

Loosen screw (1) on clamp for selector lever cable.

Unscrew selector lever cable from base plate (2) and pull out.

 

Important: Selector lever on transmission must be in position "P".

 

Align selector lever cable free of tension in base plate (2) and pull tight.

 

Insert selector lever cable in clamp and set manual lever in position "P".

 

Press manual lever in direction "R" to stop and tighten screw (1) on clamp.

 

Check that shift lever can be put exactly in positions P-R-N-D-2-1.

Object Number: 2381024 Size: DEFAULT

Note:    If this is not the case, readjust clamp.

 

Install shift gate with cover, reconnecting plug connections for shift gate lighting.

 

Note:    Adjust selector lever scale on shift gate to correspond to white markings on cover.

 

Replace cover on console.

 

 

 

Kickdown Cable, Replace > < Fluid Pump Valve Body Assembly