Retainer Ring Table for
Axial Play - Input Shaft
Identification/colour: Thickness:
White 1.83 to 1.93 mm/0.072 to
0.076 in.
Blue 2.03 to 2.13 mm/0.080 to
0.084 in.
Red 2.23 to 2.33 mm/0.088 to
0.092 in.
Yellow 2.43 to 2.53 mm/0.096 to
0.010 in.
Green 2.63 to 2.73 mm/0.104 to
0.108 in.
In order to ensure that
marking on retainer ring is correct, check thickness of rings.
Retainer ring can be removed
and installed using Ring Pliers KM-396 after direct clutch housing has been
removed.
Important: Do not widen new retainer ring more than necessary.
|