vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Brake Band Servo Piston and/or Seal Ring, Replace > < Fluid Pan and/or Gasket, Replace

Fluid Filter and/or Gasket, Replace

 

Raise vehicle.

 

Unscrew fluid pan (16 screws).

 

Note:    Only loosen screws "A".

              Place suitable receptacle under pan to collect fluid.

 

Tilt fluid pan so that fluid can flow out over edge "B".

 

Remove remaining 2 screws.

 

Remove fluid pan with gasket. Gasket must not be reused.

 

 

Object Number: 2374262  Size: DEFAULT

 

 

Loosen screw on retainer (1) and remove fluid filter with gasket (stuck on).

 

Install fluid filter with gasket and tighten retainer (1) torque 24 Nm/17.7 lbf. ft.

 

Install fluid pan with new gasket and secure with 16 screws torque 11 Nm/8.11 lbf. ft.

 

Lower vehicle.

 

Correct transmission fluid level - see operation "Transmission Fluid Level, Check and Correct" in this group.

 

Object Number: 2381025  Size: DEFAULT

 

 


Related Literature Units
-

Brake Band Servo Piston and/or Seal Ring, Replace > < Fluid Pan and/or Gasket, Replace