OPERATIONS WITH
TRANSMISSION INSTALLED
Fluid Pan and/or Gasket,
Replace
Raise vehicle.
Unscrew fluid pan (16 screws).
Note: Only
loosen screws "A".
Place suitable receptacle under pan to
collect fluid.
Tilt fluid pan so that fluid
can flow out over edge "B".
Remove remaining 2 screws.
Remove fluid pan with
gasket. Gasket must not be reused.
Clean fluid pan and adhesive
magnets.
nstall fluid pan with new
gasket and secure with 16 screws torque 11 Nm/8.11 lbf. ft.
Lower vehicle.
Correct transmission fluid
level - see operation "Transmission Fluid Level, Check and Correct"
in this group.
|
|