|
Seal Ring in Converter
Housing , Replace
Knock out seal ring in
converter housing with Remover Hook KM-586 and Slide Hammer KM-J-7004.
Note: Release
tension on seal ring by tapping outer edge lightly with suitable screwdriver.
Do not damage main case.
|
|
|
Drive
in new seal ring using Tool KM-J-28540.
Note: If operations on carrier for driving
sprocket wheel are to be carried out, install seal ring directly afterwards.
|
|
|
|
Seal Ring for Axle
Driving Shaft in Main Case, Replace
Pull out seal ring using
Tools KM-502, KM-502-A and MKM-557.
|
|
|
Drive in new seal ring using
Tool KM-J-26938 in connection with KM-J-8092.
|
|
|
Seal Ring for Axle
Driving Shaft in Main Case Cover, Replace
Pull out seal ring using
Tools KM-502, KM-502-A and MKM-557.
|
|
|
Drive in new seal ring using
Tool KM-J-26938 in connection with KM-J-8092.
Note: To
prevent damage, place main case cover on a wooden support.
|
|
|
Seal Ring for Selector
Shaft in Main Case,
Replace
Lever out seal ring using
screw driver.
|
|
|
Drive in new seal ring using
suitable socket wrench.
|
|
|
|
|
|
|
