Astra
Construction of Limited Slip Differential (F 10 - Manual Transmission)
Type of installation As factory-installed optional equipment (up to MY '87) - if service-installed, only in connection with steering shock absorber.
Code No. etched on 019 054 ... differential housing 4061...
Cataloque No. 373 000 (90 105 441)
Radial guide disk No: guide in differential body and cover
Cup spring/number Yes: 1 on drive gear side, thickness = 1.5 mm
Number of outer plates per side 1 Arrangement of plates
Number of inner plates per side 1 Drive gear side Opposite side
Differential pinion shafts 2
Differential pinions 4
Pressure plate Pressure plate Outer plate Outer plate Slip value (approx. %) 25 Interior plate Inner plate Cup spring (install ball side outward)
Location of cover on differential block On drive gear side
King pin angle at compress ring 45°
Check slip torque Permissible 10 to 20 Nm (7.4 to 14.8 lbf.ft.) Lightly lubricate inner parts beforehand using Special Oil 19 40 750 (90 001 777), or alternatively Transmission Fluid 19 40 759 (90 188 629).
|