vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Turbine Shaft, Assemble - 4- and 5 -Speed Manual Transmission > < End Shield with Main Shaft and Turbine Shaft, Remove and Disassemble

Astra

Turbine Shaft, Disassemble - 4 and 5-Speed Manual Transmission

 

       If teeth of gear cluster are damaged, corresponding gear on shaft must always be replaced as well.

 

Press turbine shaft from gear cluster using suitable drift.

 

 

Object Number: 2374297 Size: DEFAULT

 

 

       F 10 and F 13 Manual Transmission

 

Press ball bearing from gear cluster using a suitable piece of pipe.

       Beforehand, remove snap ring and washer in front of ball bearing.

 

       F 16 Manual Transmission and F 20 Manual Transmission

 

Press ball bearing from gear cluster using Drift KM-407-A.

       Beforehand, remove snap ring in front of ball bearing.

 

 

 

Object Number: 2380174 Size: DEFAULT

 

 

 

Turbine Shaft, Assemble - 4- and 5 -Speed Manual Transmission > < End Shield with Main Shaft and Turbine Shaft, Remove and Disassemble