|
Wiring
Harness - Trailer Hitch, Replace
Remove
Unscrew
trailer hitch socket from bracket.
Disconnect
wiring harness from socket.
Disconnect
wiring harness from rear lamps (not on vehicles with Check Control).
Disconnect
wiring harness at plug connection from rear wiring harness.
Unscrew
ground from rear end panel.
Pull
wiring harness with rubber grommet into rear compartment.
Install
Analogously
in reverse order.
Socket
connections:
1/L = black/white
2/54g = red or black/blue
3/31 = brown
4/R = black/green
5/58R = grey/red
6/54 = black/yellow
7/58L = grey/black
Illus.
B 9423 shows:
A = Saloon
B = Estate
C, C1 = Corresponding
connections
if equipped
with
Check Control
|
