Set transmission in "neutral" position and remove front wheel.
Install, Connect Fasten brake disc with two wheel bolts and one approx. 10 mm/0.4 in. thick spacer for each. Attach dial gauge with commercially available magnetic holder as shown in illustration. Apply probe of dial gauge perpendicularly to brake disc approx. 10 mm/0.4 in. from outer edge of brake disc with some pre-tension.
Measure Permissible lateral runout max. 0.1 mm/0.0039 in.
Remove, Disconnect Remove gauge with measuring device and wheel bolts and install front wheel. Wheel to wheel hub - 110 Nm / 81 lbf. ft. |