vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 21 KNOCK RTD. CYL. 4 > < F0: DATA LIST - Test Step 19 KNOCK RTD. CYL. 2

Multec-S X 14 XE /  X 16 XE (L)         F0:DATA LIST

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

20

KNOCK RTD. CYL.3

 

Switch off all consumers

Engine running at idle speed, operating temperature

Selector lever in position "P" or "N" (AT only)

 

 

Note:

If only one of these cylinders is affected by the ignition retard, check whether the spark plug for the cylinder in question has the prescribed heat rating

If all cylinders are affected by the ignition retard, check that fuel with at least RON 95 is used and that all spark plugs have the prescribed heat rating.

0 °CA

16, 18

E1

 

 

 

 

 

 

 

 

 


Related Literature Units
-F2: TROUBLE CODE TABLE - Trouble Code 16 KNOCK SIGNAL CIRCUIT
-

F0: DATA LIST - Test Step 21 KNOCK RTD. CYL. 4 > < F0: DATA LIST - Test Step 19 KNOCK RTD. CYL. 2