vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0:Data List Test Step 21 KNOCK RTD. CYL.4 > < F0:Data List Test Step 19 KNOCK RTD. CYL.2

Multec- S X 14 XE /  X 16 XE (L)      F0:DATA LIST

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

20

KNOCK RTD. CYL.3

 

Switch off all electrical consumers

Engine running at idle speed, operating temperature

Selector lever in position "P" or "N" (AT only)

AC OFF (AC only)

 

Note:

If only one cylinder is affected by the ignition retard, check that the spark plug for the cylinder in question has the prescribed heat rating.

If all cylinders are affected by the ignition retard, check that unleaded fuel with at least 95 RON is used and that all spark plugs have the prescribed heat rating.

0 °CA

 

16, 18

E1

 

 

 

 

 

 

Notes on Trouble-shooting:

Nominal Value:

Cause of fault:

(If nominal value is not attained)

 

·   Check according to data list no. 15 KNOCK VOLTAGE

Nominal values OK

·   Remedy according to data list no. 15 KNOCK VOLTAGE

 

 

 

 

 

 


Related Literature Units
-F2:Trouble Codes - Trouble Code No. 16 KNOCK SIGNAL CIRCUIT
-

F0:Data List Test Step 21 KNOCK RTD. CYL.4 > < F0:Data List Test Step 19 KNOCK RTD. CYL.2