vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Oil Lines > < Gasket between Intake Manifold and Cylinder Head, Replace (15 DT, X 15 DT) DT)

Corsa B

 

Charge Pressure, Check  

Object Number: 616196 Size: DEFAULT  Inspect   

Before checking the charge pressure, check that the entire intake system is in good condition.  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect pressure hose from intake manifold to pressure unit on distributor injector pump.  

Object Number: 2379269 Size: DEFAULT

 

 

Object Number: 616192 Size: DEFAULT  Install, Connect   

Connect suitable piece of hose between pressure hose and connection to intake manifold. Connect pressure gauge from MKM-667.  

Object Number: 616196 Size: DEFAULT  Inspect   

Start engine and allow to race without load.  

Max. charge pressure: 0.68 bar at 5600 rpm.  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect gauge.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Connect pressure hose to intake manifold.  

Object Number: 2394192 Size: DEFAULT

Oil Lines > < Gasket between Intake Manifold and Cylinder Head, Replace (15 DT, X 15 DT) DT)