vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0:Data List - Test Step 11 SELECTOR TER. A > < F0:Data List - Test Step 09 SELECTOR POS.

F0:DATA LIST

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

10

ACTUAL GEAR

Apply parking brake and depress brake pedal Engine running at idle speed, operating temperature Selector lever in "D"

"Winter Program" not selected

Select "Winter Program"

 

Selector lever in "D"

Select "Economy Program"

Accelerate vehicle smoothly from 0 km/h to 120 km/h (0 mph to 75 mph)

 

 

 

 

 

-1-

-3-

 

 

 

 

consecutively

-1-,-2-,-3-,-4-

 

41

-

Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

·   Check automatic transmission fluid level

 

OK

 

·   Top up transmission fluid to correct fluid level (see section 5.1)

 

·   Test drive

 

Shift function OK

 

·   Carry out diagnosis according to Mechanical/Hydraulic Trouble-shooting Table

 

·   Carry out Actuator Test nos. 03 and 04

 

OK

 

·   Locate malfunction as specified in test step nos. 03 and 04

 

·   Read out trouble codes with TECH 1

 

no trouble codes

 

·   Locate fault as specified in relevant checking procedure

 

 

If all nominal values are attained

 

·   Transmission control unit defective.

 

 

 

 


Related Literature Units
-Solenoid Valves, Clutches, Brakes, Overrunning Clutches AF 13
-
-

F0:Data List - Test Step 11 SELECTOR TER. A > < F0:Data List - Test Step 09 SELECTOR POS.