vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Quick Check F0:DATA LIST No.17 TPS LOAD SIGNAL > < Quick Check F0:DATA LIST No.10 ACTUAL GEAR

Electronic 4-Speed Automatic Transmission AF 13 / 14 / 20 / 22  Quick Check F0:DATA LIST

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Ter-

minal

15

TPS SIGNAL

AF 14 / 20 automatic transmission with 16 SV, 18 SV engine (EI Plus control unit) or with C 20 NE, 20 NE engine (Motronic ML 4.1; Model Year '89)

 

Ignition ON

Engine OFF

Apply parking brake

Engine throttle valve CLOSED

(accelerator pedal in idle position)

Engine throttle valve OPEN

(accelerator pedal fully depressed)

 

Note:

The throttle valve potentiometer is connected directly to the transmission control unit, i.e. the transmission control unit receives information about the throttle valve position directly from the potentiometer.

 

 

 

 

 

 

 

 

 

 

Continued overleaf

 

 

 

 

 

 

 

 

greater than 0.5 V

 

lower than 4.6 V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21, 22

15, 32,

35

15

TPS SIGNAL

(continued)

 

all other configurations

 

Ignition ON

 

Note:

The throttle valve potentiometer is connected to the corresponding engine control unit. The automatic transmission receives a prepared signal from the engine control unit, proportional to the throttle valve position.

See test step 17 for the configurations in which TECH 1 displays "NOT USED"

 

 

 

 

 

NOT USED

21, 22

15, 32,

35

 

 

 

 

 

 

 

 

 

 


Related Literature Units
-F2:TROUBLE CODE TABLE Trouble Code 21 THROTTLE POSIT. SENSOR VOLTAGE HIGH
-

Quick Check F0:DATA LIST No.17 TPS LOAD SIGNAL > < Quick Check F0:DATA LIST No.10 ACTUAL GEAR