vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:TROUBLE CODE TABLE Trouble Code 36 TCC SOLENOID VOLTAGE HIGH > < Axle Shaft Seal Rings, Replace

Electronic 4-Speed Automatic Transmission AF 13 / 14 / 20 / 22  F2:TROUBLE CODE TABLE

 

 

Trouble

Code

 

Information Sensor

Cause of Fault

Remedy in

F0:DATA LIST

No.

 

Trouble Code Storage when ...

 

Remarks

29

TCC SOLENOID

VOLTAGE LOW

05

·  The voltage level recognized by control unit at the relevant control unit output is Low (0 V),although control unit output was set at High (12 V; solenoid valve is not actuated)

     (short circuit to ground)

·   With ignition ON the fault is not recognized

·   The fault is recognized if the solenoid valve is actuated

 

If trouble code 29 was recognized, the

converter clutch is not engaged.

 

 

 

 

 

 

 


Related Literature Units
-Quick Check F0:DATA LIST No.05 TCC SOLENOID

F2:TROUBLE CODE TABLE Trouble Code 36 TCC SOLENOID VOLTAGE HIGH > < Axle Shaft Seal Rings, Replace