vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Differential, Assemble and Install (F10/F15) > < Axle Shaft Seal Rings, Replace

Corsa B

 

Seal Ring for Speedometer Helical Gear (Driven), Replace  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Unbolt fastening bolt for retainer (see illus. I). Lever out guide piece and helical gear with screwdriver.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Install speedometer helical gear (driven) with new O-ring (2). Ensure there is no wear or external damage. Insert speedometer helical gear (1) and bolt on with bolt (3) - 4 Nm / 3 lbf. ft.  

Object Number: 2394377 Size: DEFAULT

 

 

Differential, Assemble and Install (F10/F15) > < Axle Shaft Seal Rings, Replace