vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Bearing Rings in Transmission Housing, Replace (F10/F15) > < Gasket for Differential Cover, Replace replacement

Corsa B

 

Differential Housing, Disassemble (Release Bearing, Remove) (F 10/F 15)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Unbolt clamp bolt (arrow) from clutch release lever. Pull out release lever and remove release bearing.  

Object Number: 2374332 Size: DEFAULT

Drive out both bearing bushings (arrows) for clutch release lever using KM-304.  

Object Number: 2385086 Size: DEFAULT

 

 

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Unbolt clutch release bearing guide from transmission housing (arrows).  

Object Number: 2393840 Size: DEFAULT

Object Number: 616192 Size: DEFAULT  Install, Connect   

Ensure that O-ring (arrow) is correctly seated. Stick on O-ring with bearing grease.  

Bolt on guide for clutch release bearing on transmission housing - tightening torque 5 Nm / 4 lbf. ft.  

Install bearing bushing. Install release bearing and release lever and fasten release lever with clamp bolt - tightening torque 35 Nm / 26 lbf. ft.  

Object Number: 2393841 Size: DEFAULT

 

 

Bearing Rings in Transmission Housing, Replace (F10/F15) > < Gasket for Differential Cover, Replace replacement