Recommend equipment for MIG brazing
Note: If applicable,
also note the recommendations for MIG inert gas brazing equipment
in the TIS Newsletter!
Important:
Opel/Vauxhall recommends the use of MIG brazing equipment specified
in the list below.
Important: In
order to maintain high quality, only use Opel/Vauxhall-approved MIG
brazing wiring CuSi3 as the parameter settings of the gas-shielded
MIG brazing equipment are affected if other brazing wire is
used.
Observe the following when MIG
brazing.
- Only the machines specified below from the relevant
manufacturer are recommended by Opel/Vauxhall for bodywork
repair.
- Only the machines specified below are pre-programmed with
special welding programs/parameter settings/parameter documentation
for Opel/Vauxhall vehicles.
- Only the machines specified below have specific welding
programs/parameter settings for each new Opel/Vauxhall vehicle
model.
- The following brazing wire and shielding gas are to be used for
gas-shielded MIG brazing:
- Brazing wire CuSi3, reel D200 with 5 kg, obtained via EPC, part
no. 93 180 983, cat. no. 19 72 004
- Argon shielding gas (quality 4.6 or higher)
Recommended MIG welders (version February
2008)
Note: All of the
recommended machines listed below are purchased directly from the
manufacturer. Please contact the manufacturer at the address
specified below to find a representative in your area.
Note: A reel adapter
for reel D200 and basket reel K300 can be obtained directly from
the manufacturer.
1.
|
CLOOS
|
|
Carl Cloos Schweißtechnik GmbH
|
|
Industriestraße
|
|
D-35708 Haiger
|
|
Germany
|
|
www.cloos.de
|
|
The following product(s) fulfil the requirements:
|
|
1.1.
|
GLC 353 MC3 with CK 98 A
|
|
1.2.
|
GLC 303 MC4
|
|
Reference number:
|
|
1.1.
|
OP 510402
|
|
1.2.
|
OP 88-08-03
|
|
|
Note: GLC 353 MC3 has
been replaced by GLC MC4.
|
|
2.
|
ELMATech (previously DALEX)
|
|
ELMATech AG
|
|
Plant 2
|
|
Wisseraue 1
|
|
D-51597 Morsbach
|
|
Germany
|
|
www.elmatech-ag.com
|
|
The following product fulfils the requirements:
|
|
2.1.
|
MIDI – MIG 300/800
|
|
Reference number:
|
|
2.1.
|
SA.20268.1
|
|
|
2.2
|
Stanners Equipment Ltd.
|
|
Stanners Equipment Ltd.
|
|
Coopies Lane Industrial Estate
|
|
Morpeth
|
|
Northhumberland
|
|
NE61 6JN
|
|
United Kingdom
|
|
www.stanners-equipment.co.uk
|
|
The following product fulfils the requirement:
|
|
2.2.
|
MIG 300/800 PG
|
|
|
3.
|
FRONIUS
|
|
Fronius International GmbH
|
|
Buxbaumstraße 2
|
|
A-4600 Wels
|
|
Austria
|
|
www.fronius.com
|
|
The following product fulfils the requirements:
|
|
3.1.
|
TPS2700 4R/E
|
|
Reference number:
|
|
3.1.
|
EXP 1.2.009
|
|
|
4.
|
KEMPPI
|
|
Kemppi GmbH
|
|
Otto-Hahn-Straße 14
|
|
D-35510 Butzbach
|
|
Germany
|
|
www.kemppi.com
|
|
The following products fulfil the requirements:
|
|
4.1.
|
Pro 3200 EVO with Promig 530 including MXE panel
|
|
4.2.
|
Kempact TM Pulse 2800 Automotive
|
|
Reference number:
|
|
4.1.
|
PROMIG 3200 OPEL
|
|
4.2.
|
KPACT2800AUTO
|
|
|
5.1
|
MIGATRONIC
|
|
Migatronic Schweißmaschinen GmbH
|
|
Sansusweg 12
|
|
D-35435 Wettenberg
|
|
Germany
|
|
www.migatronic.com
|
|
The following product fulfils the requirements:
|
|
5.1.
|
Flex 330 XMI-L, No.: 79541063 Version GM
|
|
|
Flex 3000 C-L, No.: 79541317 Version GM
|
|
|
Flex 3000 C-L Duo, No.: 79541330 Version GM
|
|
|
5.2
|
Stanners Equipment Ltd.
|
|
Stanners Equipment Ltd.
|
|
Coopies Lane Industrial Estate
|
|
Morpeth
|
|
Northhumberland
|
|
NE61 6JN
|
|
United Kingdom
|
|
www.stanners-equipment.co.uk
|
|
The following product fulfils the requirement:
|
|
5.2.
|
AS3000 Synergic MIG / MAG Welder
|
|
Reference number:
|
|
5.2.
|
AS3000
|
|
|
No longer in production, for replacement see
2.2
|
6.
|
WIELÄNDER & SCHILL
|
|
Wieländer & Schill
|
|
Siederstraße 50
|
|
D-78054 Villingen-Schwennigen
|
|
Germany
|
|
www.wielanderschill.com
|
|
The following product fulfils the requirements:
|
|
6.1.
|
InvertaPuls IP 10 Digital
|
|
Reference number:
|
|
6.1.
|
331010
|
|
|
7.
|
FAN
|
|
FAN spot welding and bodywork technology
|
|
Laahenerstr. 26
|
|
A-4600 Wels
|
|
Austria
|
|
www.fan-austria.com
|
|
The following product fulfils the requirements:
|
|
7.1.
|
Proton AL Puls+ 2500
|
|
Reference number:
|
|
7.1.
|
FAN, No.0902
|
|
|
|