Wheel Bearing – Drum Hub, Replace –
Models F 08, F 08 & W5L, F 68
Remove
2. |
Remove pulse sensor of drum hub
|
3. |
Press wheel bearing out of drum hub with KM-500-5 (2)
• |
Detach retaining ring (1) with retaining ring pliers from drum
hub
|
|
|
|
4. |
Clean drum hub and coat hub with bearing grease.
|
Install
5. |
Press wheel bearing into drum hub with KM-273 (1)
• |
press in until it is in contact with the drum hub
|
• |
Attach retaining ring (2) to drum hub with retaining ring
pliers
|
|
|
|
6. |
Install new pulse sensor
|
|