Operational steps - Brief Survey
The following sequence is used as a brief survey to show the individual operation steps used for wiring harness repair:
Step A - Service literature / safety regulations
A1 - Carefully read service literature
A2 - Observe safety regulations
Step B - Prepare special service tools and materials
B1 - Prepare special service tools
B2 - Prepare materials
Step C - Preparations
C1 - Preparatory tests
C2 - Preparations on the vehicle
C3 - Preparation of the repair zone
Step D - Perform repair
D1 - Damage type 1 - Repair of damaged cables
D2 - Damage type 2 - Replacement of plug casings
D3 - Damage type 3 - Replacement of individual spring contacts
D4 - Damage type 4 - Replacement of plug casings and individual spring contacts
D5 - Damage type 5 - Replacement of complete wiring harness plugs
D6 - Damage type 6 - Repair of damaged CAN-bus wires
Step E - Final operations
E1 - Assemble vehicle
E2 - Perform function check
E3 - Program volatile memories
Step F - Environmental protection
F1 - Dispose of parts
