vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
J608110 Thermostat with Coolant Connections, Remove and Install (Z 14 XE, Z 16 YNG with AC) > < Remove and install thermostat with coolant connection (Z 10 XE, Z 10 XEP, without air conditioning, LHD)

Corsa C

Remove and install thermostat housing (Z 12 XE, Z12 XEP Z 14 XEP with air conditioning LHD)

  Remove

1.   Open bonnet
2.   Raise vehicle
3.   Drain coolant
•   Place collecting basin underneath.
•   Open drain bolt (arrow)
4.   Lower vehicle
Object Number: 2410656 Size: DEFAULT


5.   Detach upper coolant hose (2) from coolant connection
•   Release clamp
6.   Detach thermostat housing (1)
•   Unscrew 3 bolts
7.   Clean sealing surfaces
•   Coolant pump, coolant pipe
Object Number: 2410657 Size: DEFAULT


  Install

8.   Note the different versions when replacing components! Be sure to use the correct part and catalogue number!
9.   Install thermostat housing
•   Replace gasket
•   Tighten 3 bolts 8 Nm
10.   Attach upper radiator hose
•   Fasten clamp
11.   Raise vehicle
12.   Close coolant drain bolt
13.   Lower vehicle
14.   Top up and bleed cooling system – see operation "Cooling System, Top up and Bleed"
15.   Close bonnet

J608110 Thermostat with Coolant Connections, Remove and Install (Z 14 XE, Z 16 YNG with AC) > < Remove and install thermostat with coolant connection (Z 10 XE, Z 10 XEP, without air conditioning, LHD)