Replace rear crankshaft seal ring
Remove
2. |
Remove clutch thrust plate and clutch disc
|
3. |
Detach flywheel (1)
• |
Unscrew 8 bolts (arrows)
|
|
|
|
4. |
Lever out crankshaft seal ring using suitable tool
|
|
5. |
Insert crankshaft seal ring on EN-46777-10 and EN-46777-20
• |
Coat crankshaft seal ring with engine oil
|
• |
Insert new seal ring (3) on EN-46777-10 (1) via EN-46777-20 (2)
|
|
|
6. |
Insert crankshaft seal ring in crankshaft
• |
Install seal ring (1) with EN-46777-10 (2)
|
|
|
|
Install
7. |
Attach flywheel (1)
• |
Tighten 8 new bolts (2) 28 Nm
|
|
|
|
8. |
Install clutch thrust plate with clutch disk
|
9. |
Attach transmission to engine
|
|