Check oil pump
Measure
Note: Oil pump /
timing case are removed
Remove
1. |
Detach oil intake pipe (3)
|
|
|
2. |
Remove oil pump cover (2)
• |
Remove inner and outer rotors (3) and (4)
|
|
|
|
3. |
Check pump module
• |
Insert inner and outer rotors
|
• |
(I) Check radial clearance between oil pump housing and outer
rotor with feeler gauge
– |
The permissible clearance is 0.10
– 0.23 mm
|
|
• |
(II) Check axial clearance between oil pump cover and top of
toothed wheel with a straight edge and a feeler gauge
– |
The permissible clearance is 0.050
– 0.075 mm
|
|
|
|
|
Install
5. |
Attach oil intake pipe
|
|