vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Ribbed V-belt Tensioner, Check (Y 17 DT, Y 17 DTL) > < J607000 Ribbed V-belt, Replace (Y 17 DTL, without AC, LHD)

Corsa C

J607300 Ribbed V-belt Tensioner, Replace (Y 17 DTL, without AC, LHD)

1. Open bonnet

 Object Number: 2410600 Size: DEFAULT

2. Raise vehicle

3. Remove ribbed V-belt cover

  • Remove 3 bolts (1)
  • Remove clip (arrow).

4. Remove ribbed V-belt

  • Tension ribbed V-belt tensioner in direction of arrow
  • With KM-913-A
  • Note! Mark running direction
 Object Number: 2411073 Size: DEFAULT

5. Remove tensioner

  • Remove bolt (arrow)
 Object Number: 2411135 Size: DEFAULT

6. Attach tensioner

  • Tighten bolt (50 Nm / 37 lbf. ft.)

7. Install ribbed V-belt

  • Note! Observe running direction and installation position
  • Release ribbed V-belt tensioner

8. Install ribbed V-belt cover

  • Screw in bolts
  • Install clip

9. Lower vehicle

10. Close bonnet

Ribbed V-belt Tensioner, Check (Y 17 DT, Y 17 DTL) > < J607000 Ribbed V-belt, Replace (Y 17 DTL, without AC, LHD)