Vauxhall Workshop Service and Repair Manuals

1. Open bonnet

Important:   On vehicles from model year 04 with ESP - the steering angle sensor loses its basic adjustment each time the battery is disconnected. It must be recalibrated.

2. Raise vehicle

3. Remove ribbed V-belt cover

• Unscrew 3 bolts (1)
• Remove clip (arrow)

4.

Note:   The check consists of a function check of the automatic ribbed V-belt tensioner and an inspection of the ribbed V-belt and the associated components.

5. Ribbed V-Belt Tensioner, Check

• Note! Tension ribbed V-belt tensioner using fastening bolt (1) in direction of arrow using KM-913-A and allow to glide back slowly – ribbed V-belt tensioner must return to its initial position.

6. Install ribbed V-belt cover

• Tighten 3 bolts
• Install clip

7. Lower vehicle

8. Calibrate steering angle sensor

• Switch on ignition

Note:   Rotate the steering wheel one time from its right-hand to its left-hand stop.

9. Close bonnet.