vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace coolant temperature sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD) > < Remove and install engine control unit (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)

Corsa C

Replace coolant temperature sensor (Z 10 XE, Z 10 XEP, without air conditioning, LHD)

  Remove

1.   Open bonnet
2.   Remove coolant temperature sensor (1)
•   Place collecting basin underneath.
•   Disconnect wiring harness plug
Object Number: 2410613 Size: DEFAULT


  Install

3.   Install coolant temperature sensor
•   Replace seal ring
•   Tighten coolant temperature sensor 18 Nm
•   Connect wiring harness plug
4.   Check coolant level, correct if necessary
5.   Close bonnet

Replace coolant temperature sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD) > < Remove and install engine control unit (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)