vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine Z13DT - Noise poly-v-belt > < Engine Z17DTH - Booming noise at around 1500 rpm

Field Remedy: 1913

Subject: Engine Z10/12/14XEP - Noise from crankshaft area when clutch pedal is applied
Models: Engines: Option:
Agila 2004,Corsa-C 2004,Corsa-C Combo 2004,Meriva 2004 Z10XEP| Z12XEP,Z10XEP| Z12XEP| Z14XEP,Z14XEP,Z14XEP
Complaint: Noise from crankshaft when clutch pedal is applied.
Cause: Increased wear of bearing because of introduction of one normal axial bearing shell (without collar).
Production: Affected are only engines produced between the following engine B/P's: 19CR3157 till 19CV2924 (07.01.2004 - 16.02.2204). As of engine no: 19CV2925 the second axial bearings shell including collar have been re-introduced.

Remedy:

In case of customer complaint replace short block.

FunctionalGroup: J - Engine
Complaint Group: 05 - Excessive wear
Trouble Code: None

Engine Z13DT - Noise poly-v-belt > < Engine Z17DTH - Booming noise at around 1500 rpm