Seal valve body cover (AF13-II)
Remove
2. |
Remove upper coolant hose (1)
|
3. |
Remove fan housing with fan motor
|
4. |
Detach lower coolant hose (3) from radiator
|
5. |
Pull bleeder hose (2) from valve body cover
|
|
|
6. |
Drain transmission fluid.
• |
Remove drain bolt (1) and collect transmission fluid
|
|
7. |
Remove lower fluid cooler line
|
8. |
Detach upper oil cooler lines from transmission
Note: Fluid escapes
– place pan underneath.
|
9. |
Remove valve body cover
• |
Unscrew 13 bolts (arrows) from valve body cover
Note: Fluid escapes
– place pan underneath.
If necessary use plastic hammer to loosen cover.
|
|
|
|
Install
10. |
Clean sealing surfaces and remove gasket residue
|
11. |
Attach valve body cover to transmission
Note: Pay attention to
different bolt lengths.
• |
Clean bolt and transmission housing threads
|
• |
Coat bolt with locking compound
|
• |
Coat valve body cover with sealing compound
|
|
12. |
Attach transmission fluid drain bolt (1)
|
13. |
Attach upper fluid cooler line to transmission
|
14. |
Install lower fluid cooler line
|
|
|
15. |
Attach bleeder hose (2) to valve body cover
|
16. |
Attach lower coolant hose (3) to radiator
|
17. |
Install fan housing with fan motor
|
18. |
Install upper coolant hose (1)
|
19. |
Top up cooling system
|
20. |
Check and correct transmission fluid level
|
|
|
|