|
Replace solenoid valve in transmission
(AF13-II)
 Remove
| 1. |
Detach valve body cover from transmission 
|
| 2. |
Disconnect affected wiring harness plug
|
| 3. |
Remove affected solenoid valve
- Solenoid valve for neutral switching (1)
- Pressure regulator (2)
- 2-3 gearshift solenoid valve (3)
- 1-2 / 3-4 gearshift solenoid valve (4)
- Converter clutch solenoid valve (5)
Note: The pressure
regulator cannot be supplied separately and in the event of a fault
must be replaced together with the valve body
.
|
|
|
Install
| 4. |
Attach affected solenoid valve to valve body with new O-ring
(1)
| • |
Tighten solenoid valve 7 Nm
|
| • |
Connect wiring harness plug
|
|
| 5. |
Install valve body cover
|
| 6. |
Check and correct transmission fluid level
|
|
|
|
