Axle Shaft Seal Rings, Replace
Remove
1. |
Remove affected axle shaft from transmission .
|
2. |
Remove intermediate shaft
• |
Only if right axle shaft seal ring is affected and right
intermediate shaft is fitted
|
|
3. |
Remove affected axle shaft seal ring
• |
Pull axle shaft seal ring out of transmission housing with
KM-J-7004 (1) and KM-586 (2)
|
|
|
|
Install
4. |
Install new axle shaft seal ring
• |
Coat new axle shaft seal ring with transmission fluid
|
• |
F13 and F17 transmission
– |
Drive in flush with KM-446 (1)
|
|
• |
F23 transmission
– |
Drive in flush with KM-519
|
|
|
|
|
5. |
Install intermediate shaft
• |
Only if right axle shaft seal ring is affected and right
intermediate shaft is fitted
|
|
6. |
Install axle shaft in the transmission
|
7. |
Check transmission fluid level and correct if necessary
|
|