vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Front Fuel Return Line, Remove and Install > < Fuel Supply Line of Injection Pump, Remove and Install

Fuel Return Line of Injection Pump, Remove and Install

Affects diesel engine Z 13 DT, Z 13 DTJ

Warning:   Fuel escape - safety requirements and country-specific regulations should be observed. Drained fuel should be stored in a suitable, sealable container.

Note:   Front fuel distributor pipe to high pressure pump

  Remove

1.   Disconnect battery
•   Release earth cable
2.   Detach fuel line (2) from fuel distributor pipe (1)
•   Release clamp (arrow)
•   seal off with KM-6015
3.   Detach and remove fuel line (2) at pump (3)
•   Release clamp (arrow)
•   seal off with KM-6015
Object Number: 2407909  Size: DEFAULT


  Install

4.   Attach fuel line (2) to pump (3)
•   Remove KM-6015
•   Attach clamp (arrow)
5.   Attach fuel line (2) to fuel distributor pipe (1)
•   Attach clamp (arrow)
•   Remove KM-6015
6.   Connect battery
•   Secure earth cable
7.   Program volatile memories
8.   Check fuel system for leaks
•   Check visually
•   with the engine running

Front Fuel Return Line, Remove and Install > < Fuel Supply Line of Injection Pump, Remove and Install