|
Outside Handle – Front Door, Remove and
Install
 Remove
| 1. |
Remove front door panel
| • |
Prise off panel (1) with a plastic wedge
|
|
|
|
|
| 2. |
Remove fixed handle part on front door with lock cylinder
| • |
Pull moving handle part (I) to the outside and hold
|
| • |
Turn screw (II) to left to the perceptible stop
Note: Moving handle
part must now be fixed in the pulled position
|
| • |
Remove fixed handle part with lock cylinder (IV)
|
|
| 3. |
Detach door handle
| • |
Pull moving handle part (III) towards the back
|
|
|
Install
| 4. |
Attach door handle
| • |
Insert moving handle part in door panel
|
|
| 5. |
Fit fixed handle part on front door with lock cylinder
| • |
Insert fixed handle part with lock cylinder
|
| • |
Turn screw to right to the perceptible stop
Note: Hold moving
handle part under tension during the screw process
|
|
| 6. |
Attach front door panel
|
|
