Replace bracket for door outside handle (rear
door)
Remove
1. |
Detach rear door inner panelling
|
2. |
Partly detach water vapour barrier
• |
Detach water vapour barrier in hatched area
|
|
|
|
3. |
Remove front door panel
• |
Prise off panel (1) with a plastic wedge
|
|
|
|
|
4. |
Remove fixed handle part, rear door
• |
Pull moving handle part (I) to the outside and hold
|
• |
Turn screw (II) to left to the perceptible stop
Note: Moving handle
part must now be fixed in the pulled position
|
• |
Remove fixed handle part with lock cylinder (IV)
|
|
5. |
Detach door handle
• |
Pull moving handle part (III) towards the back
|
|
|
6. |
Detach bracket for outside door handle
|
|
|
Install
7. |
Attach bracket for outside door handle
|
8. |
Attach door handle
• |
Insert moving handle part in door panel
|
|
9. |
Install fixed handle part, rear door
• |
Pull moving handle part to the outside and hold
|
• |
Close moving handle part
|
|
10. |
Attach front door panel
|
11. |
Attach water vapour barrier
|
12. |
Attach rear door inner panelling
|
|