Vauxhall Workshop Service and Repair Manuals

Remedy

In case of failure code setting check ABS sensor ring for 
contamination and clean it if neccessary prior replacement 
of any parts.

Working Procedure:

 1. Raise vehicle
 2. Remove respective front wheel
 3. Remove ABS sensor from steering knuckle
 4. Apply brake cleaner to cotton bud

    - Thoroughly clean ABS sensor ring through opening (1) with 
      the cotton bud while turning the brake disc

    - Dry area afterwards by use of compressed air

    - Check by use of a torch that the ABS sensor ring is free of
      grease and any particles

Labour-Times:                                     TC:       Hours:

U3 285 90     Clean ABS Sensor Ring               90        S.A. 

The costs for this repair will be covered during warranty and policy.
For policy please refer to the Policy Guideline (WebPG/Kuugel).
The regular Warranty Procedure will apply.