Vauxhall Workshop Service and Repair Manuals > Corsa D > J Engine and Engine Aggregates | Fuel Injection Systems | Electronic Diesel Control EDC 17 | Repair Instructions

Replace mixture regulation oxygen sensor

Remove

1.	Open bonnet

2.	Remove engine cover

Remove mixture regulation oxygen sensor (1) from return manifold (2)

•	Disconnect wiring harness connector.

•	Unclip cable

•	Unscrew using KM-6129

Install

Install mixture regulation oxygen sensor in return manifold

•	Apply special grease to thread

•	Tighten oxygen sensor 45 Nm

•	Use km-6129

•	Connect wiring harness plug

•	Attach wiring harness

5.	Install engine cover

6.	Close bonnet

Vauxhall Workshop Service and Repair Manuals