|
Lock Cylinder for Steering and Ignition Lock,
Replace
 Remove
| 1. |
Remove steering column panelling 
|
|
| 2. |
Remove steering and ignition lock cylinder
| • |
Ignition key to position I
|
| • |
Release lock cylinder (2) (1)
Note: Using a suitable
tool (1), e.g. an angled screwdriver for internal hexagon socket 2
mm WAF (width across flats), release lug (arrow).
|
| • |
Remove lock cylinder (3)
|
|
|
Install
| 3. |
Install steering and ignition lock cylinder
| • |
Insert lock cylinder
Note: Insert lock
cylinder in position "I" over catch in steering and ignition lock
casing.
|
|
| 4. |
Install steering column panelling
|
|
