Vauxhall Workshop Service and Repair Manuals > Corsa D > N Electrical Equipment and Instruments | Switches, Control Unit, Relays, Ignition Lock | Switches, RON Coding Plug | Repair Instructions | Replace reversing lamp switch (F13+/F17+)

Replace reversing lamp switch (F13+/F17+)

Remove

Remove reversing lamp switch (2) from transmission

•	Detach wiring harness plug (1) from reversing lamp switch

•	Unscrew reversing lamp switch

•	Remove seal ring

Install

Install reversing lamp switch with new seal ring

•	Tighten switch 20 Nm

3.	Connect wiring harness plug to reversing lamp switch

4.	Check transmission fluid level and correct if necessary

Vauxhall Workshop Service and Repair Manuals