|
Special service tools
KM - 128-A Tension Gauge
To check the V-belt tension
|
|
|
KM- 134-A Wrench
To remove and install the cylinder head screws
|
|
|
KM - 161 -A Bearing Puller
To remove the toothed belt drive gear from crankshaft
|
|
|
KM - 226-A Measuring Device
To adjust supply begin with KM - 571 - B
|
|
|
KM - 232 Adapter
To check oil pressure with KM - 498 - B
|
|
|
KM-252-2-A Cables
To remove and install the engine
|
|
|
KM - 263- B Engine Lifter/Holder
To hold engine, in conjunction with KM-252-2-A
|
|
|
KM - 340-C Valve Seat Cutter Set
To grind and correct the valve seat
|
|
|
KM - 348 Valve Spring Compressor
To compress valve spring in conjunction with
KM - 653 on removed cylinder head
|
|
|
KM - 412 Engine Overhaul Stand
To hold the removed engine
|
|
|
KM - 412 - 11 - A Adapter
To hold engine in conjunction with KM - 412
|
|
|
KM - 470 - B Angular Torque
Wrench
To tighten cylinder head bolts
|
|
|
KM-498-B Oil Pressure Gauge
To check oil pressure in engine in conjunction with KM-232
|
|
|
KM - 517 Locking Device
To lock flywheel
|
|
|
KM-533-A Connector
To check the compression in conjunction with KM-649
|
|
|
KM-571 -B Dial Gauge
To measure supply begin in conjunction with KM-226-A
|
|
|
MKM - 596 Thermometer
To measure oil temperature
|
|
|
MKM-604-B Torx Bit and Socket Set
To remove and install Torx bolts
|
|
|
KM - 609 Electronic Kit I
To diagnose electric and electronic systems
|
|
|
MKM - 610 Torque Wrench 1/2"
Drive
Measuring range 30 - 130 Nm/23 - 96
lbf. ft.
|
|
|
MKM - 611 Torque Wrench 3/8"
Drive
Measuring range 10 - 60 Nm/7 - 44
lbf. ft.
|
|
|
KM - 648 Oil Filter Wrench
To remove and install oil filter element
|
|
|
KM - 649 Connector
To check compression in conjunction with
KM - 533 - A
|
|
|
KM - 650 Valve Compressor
To adjust the valve play
|
|
|
KM - 651 Puller
To remove the injector pump pulley with engine installed
|
|
|
KM - 652 Locking Device
To lock flywheel
|
|
|
KM - 653 Adapter
To tighten the valve springs in conjunction with
KM - 348
|
|
|
KM - 654 Installer
To remove and install valve guide
|
|
|
KM - 655 Installer
To install the piston cooling (oil nozzle)
|
|
|
KM - 656 Installer
To install the front crankshaft and camshaft seal rings
|
|
|
KM - 657 Installer
To install oil pump seal ring in oil pump holder
|
|
|
KM - 658 Installer
To install rear crankshaft seal ring in seal ring holder
|
|
|
KM-659-A Guide Bolt
To centre the clutch disc
|
|
|
KM - 660 Installer
To install front camshaft seal ring (engine removed)
|
|
|
MKM - 667 Pressure and Vacuum Pump
To measure turbocharger charge air pressure
|
|
|
KM - 668 Oil Filter Wrench
To remove and install oil filter
|
|
|
KM - 726 Oil Filter Wrench
To remove and install oil filter
|
|
|
KM - 728 Installing Wrench
To install injectors
|
|
