Front Member, Replace
Remove
Attaching parts.
|
Drill off right angled retainer.
|
Drill off front member,
|
provide access to welding spots by separating underside of front
member (separation section 2).
|
|
|
Install
(Illustration E-6255 shows welding operations for left
side).
Fit front member.
Apply spot weld paint.
Weld in front member.
Seal cavities.
|
|
Caution
A weld must be used in the area of the towing eye, deviating
from
|
production.
|
Welding lengths must be complied with!
|
Install
(Illustration E-6223 shows welding operations for right
side)
|
|
Attaching parts.
|
Weld in front member and seal cavities.
|
All welding length specifications in mm.
|
|
|
|