Test Steps and Fault Remedies
Test
Check
Notes
Nominal
Step
Equipment
Value
Multimeter
of
between
MKM-587-A
5
Voltmeter, range 20 V, DC
Voltage supply for electric seat adjustment
· Voltage to fuse F5
F5
Ground
· Remove F5
· Measurement at fuse socket F5
higher than 11.5 V
· Voltage to wiring harness coupling X1
X1/ Ter. 50
· Insert F5 again
· Disconnect battery negative terminal
· Release wiring harness connection X1 and disconnect
· Connect battery negative terminal
· Measurement at wiring harness coupling X1/Ter. 50
· If nominal value is attained: test step 6
Possible Fault:
(If nominal value is not attained)
1. No battery voltage to fuse F5
2. Interruption in instrument panel wiring harness between fuse F5 and wiring harness coupling X1/Ter. 50