|
Heater Mat – Leather Rear Seat / Leather
Rear Seat Backrest, Remove and Install
Note: The following
operations on the rear seat are also to be carried out analogously
on the rear seat backrest.
|
 Remove
Detach rear seat upholstery from cushion – see operation
"Upholstery/Cushion – Rear Seat, Remove and Install" in group
"C".
Cut open upholstery along perforated incisions. Cut off wiring
connections with scissors.
Detach cover from cemented thermosensor and remove
thermosensor.
Remove heater mat wiring harness and remove heater mat.
|
|
Install
|
Insert new heater mat between upholstery and sewn-in
intermediate layer, at the same time inserting wiring harness and
fix heater mat at edges with double sided adhesive tape.
Caution
Cement heater mat fold-free with upholstery.
Install
Position relays in cushion and push wiring harness plug through
cushion (analogously to front seat).
Pull rear seat upholstery over rear seat cushion.
|
|
Note: When putting
together cushion and upholstery, ensure that no loops are formed in
wiring harness (wire break hazard).
Engage seat release.
Connect wiring harness plug and install rear seat.
Note: Confusion of
wiring harness plugs is avoided through different versions.
|
