Remove
Detach closure bolt (1) from filler/checking aperture. For
vehicles with limited slip differential, first remove plastic plug
(2).
Top up differential fluid to lower edge of filler aperture
– use special fluid – see "Technical Data –
Differential Fluid". For vehicles with limited slip differential,
first add fluid additive.
Install
Closure bolt for rear axle (1) – tightening torque 22 Nm /
16 lbf. ft., then turn bolt a further 90° + 180°.
Vehicles with limited slip differential: press plastic plug (2)
into closure bolt of rear axle.
|