vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Stabilizer and Rubber Parts > < Damping Bushing - Semi-Trailing Arm, Replace

Recommended Torque Values

Caution

Torque values deal with yield limit-controlled retaining screws which may be only be used once. Only tighten retaining screws to the appropriate torque and then continue to tighten by the amount specified.

 

Nm

Drive shaft to wheel journal flange

50 + 60° + 15°

Brake calliper to semi-trailing arm

80

Brake disc to wheel hub

4

Brake carrier to semi-trailing arm

50 + 30° + 15°

Damping blocks to vehicle underbody

65

Damping blocks to rear axle body

90 + 30° + 15°

Cover on locking differential housing

14

Single disc joint to propshaft flange M10 x 1.25 (Torx)

50 + 45° + 15°

Single disc joint to propshaft flange M12 x 1.5

95

Single disc joint to transmission/rear differential flange M10 x 1.25 (Torx)

50 + 75° + 15°

Single disc joint to transmission/rear differential flange M12 x 1.5

95

Bracket to rear differential

90 + 45° + 15°

Bracket to vehicle level control sensor

4

Centre bearing bracket

22

Centre bearing bracket to vehicle underbody

20

Bracket with level control sensor to rear axle body

12

Bracket with compressor to wheel well

12

Rear differential, rear, to front axle body

90 + 30° + 15°

Rear differential, front, to rear axle body

100 + 75° + 15°

Rear differential cover to rear differential

60

Rear axle body damping bushing to vehicle underbody

125

Clamps to auxiliary control arm

15

Level control system compressor to bracket

4

Swing arm to semi-trailing arm

20

Wheel on wheel hub

110

Wheel sensor on transmission cover

7

Wheel journal flange to wheel journal

300 1)

Semi-trailing arm to rear axle body

100

Headlamp range control sensor to rear axle body

10

Stabiliser to rear axle body

22

Shock absorber to semi-trailing arm

110

Shock absorber fastening nut on piston rod

20

Strut for rear axle body to vehicle underbody

65

Ring gear to differential/limited slip differential M10

75

Ring gear to differential/limited slip differential M12

115

Closure bolt of the rear differential

22 + 90° + 180°

Front muffler to catalytic converter

25

Auxiliary control arm to rear axle body

90 1)  

Auxiliary control arm to semi-trailing arm

45



1 ) use new self-locking fastening nut

Related Literature Units
-
-

Stabilizer and Rubber Parts > < Damping Bushing - Semi-Trailing Arm, Replace