|
Wheel Bearing and Wheel Hub
The rear wheel bearings in the Omega - B are basically
identical to those from the Omega - A / Carlton.
All Omega - B models are equipped with uniform wheel bearings to
reduce the number of different components.
The wheel bearing is removed and installed using Special
Service Tool Set KM - 620.
The wheel spindle (1) is pulled into the wheel bearing by
turning the nut (3). A washer (2) must e installed to ensure that the tool
remains lane while the wheel spindle is being pulled in. he sleeve (4)
supports the wheel bearing inner ring while the wheel spindle is being pulled
in.
|
