Align positioning hole (2) in torsional vibration damper with
torsional vibration damper hub positioning pin (1).
Attach torsional vibration damper (3), washer (4) and new
attachment screws to torsional vibration damper hub –
tightening torque 15 Nm / 11 lbf. ft. + 10° + 5°.
For version with AC: Install ribbed V-belt tension roller for AC
condenser ribbed V-belt – tightening torque 22 Nm / 16 lbf.
ft.
Install coolant pump V-belt pulley – tightening torque 10
Nm / 7.5 lbf. ft.
Install ribbed V-belt tension roller – tightening torque
22 Nm / 16 lbf. ft.
Note running direction of ribbed V-belt. Install ribbed V-belt
– see operation "Ribbed V-belt, remove and install".
Install visco-fan – see operation "Visco-fan, Remove and
Install".
|