Exhaust Manifold for Cylinders 2-4-6, Remove and
Install (X 25 XE, X 30 XE)
Caution
Leaks in secondary air system can cause damage to catalytic
converter and engine.
Remove
Remove engine – see operation "Engine, Remove and
Install".
Detach fastening bolts for upper and lower heat shields (1) from
exhaust manifold – remove heat shields.
|
|
Detach fastening bolts for secondary air metal pipe (1) from
exhaust manifold. Disconnect secondary air metal pipe (2) from hose
connection of centre metal pipe and remove.
|
|
Remove fastening bolt (1) from coolant pipe, engine transport
shackle and oil dipstick guide tube.
Detach exhaust manifold from cylinder head.
Clean
Remove gasket remnants and clean sealing surfaces.
|
|
Install
Attach exhaust manifold with new gasket and new nuts to cylinder
head – tightening torque 20 Nm / 15 lbf. ft. Attach engine
transport shackle, oil dipstick guide tube bracket and coolant pipe
to cylinder head with fastening bolt – note assembly sequence
– tightening torque 25 Nm / 18.5 lbf. ft. Attach secondary
air metal pipe to exhaust manifold and attach to hose connection of
centre metal pipe – insert fastening bolts with assembly
paste (white) – tightening torque 20 Nm / 15 lbf. ft. Attach
lower and upper heat shields to exhaust manifold. Install engine
– see operation "Engine, Remove and Install".
|