Affected Terminals: 10, 16
Possible Trouble Codes: 34
Ignition ON
Vehicle stationary
Press key F 6 in the
main menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the TECH 1 display.
Note:
In this mode, the start of
injection can be adjusted to conform to the various national exhaust gas
specifications for the various vehicle types (Saloon, Estate). Vehicles are
always supplied with the delivery status "0" (cf. table below).
Three different codes ("0", "1", "2", whereby
"1 " is not used at present) for the various versions are available
for selection. After this test is started, TECH 1 shows the
programming code set at present, and a different programming code (see
following table) can then be selected.
|
|
|