vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 74 MASS AIR FLOW SENSOR VOLTAGE HIGH > < Engine Management System Simtec 56.1 Hot Film Mass Air Flow Meter

SIMTEC 56.1          F2: TROUBLE CODE TABLE

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

73

 

MASS AIR FLOW SENSOR VOLTAGE LOW

 

09

 

·   Engine not in operating condition: deceleration cutoff and deceleration

·   Engine speed greater than 672 rpm

·   Mass air flow signal less than 5.1 kg/h

     (short circuit to ground or circuit interruption)

·   Conditions must be fulfilled for at least 3 s

 

Replacement values:

·   Trouble codes 21 and 22 not recognized:

     The control unit calculates with an air mass calculated internally from the engine speed and throttle valve angle

·   Trouble code 21 or 22 recognized:

     The control unit calculates with an air mass resulting from the engine speed

 

Effects:

·   With the exception of throttle valve adaptation, all adaptation is blocked

·   Controlled canister purge valve regulation is blocked, controlled canister purge valve is closed

Trouble code 21 or 22 recognized:

·   Oxygen sensor regulation is blocked

 

Note:

In case of a fault, the system immmediately switches to emergency operation

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 09 MASS AIR FLOW S.

F2: TROUBLE CODES - Trouble Code 74 MASS AIR FLOW SENSOR VOLTAGE HIGH > < Engine Management System Simtec 56.1 Hot Film Mass Air Flow Meter