vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F0: DATA LIST - Test Step 08 COOLANT TEMP. > < F0: DATA LIST - Test Step 06 TRANSM. CODING

FO: DATA LIST

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

 

07

INTAKE AIR TEMP.

Engine running at idle speed, operating temperature

Ambient temperature higher than 10 °C / 50 °F

 

10 to 80 °C /

50 to 176 °F

3.0 to 0.5 V

69, 71

6, 19

 

Note:    TECH 1 checks the temperature value of intake air temperature sensor P29 at Ter. 6. The voltage value is also displayed.

Notes on Trouble - shooting:

Nominal Value:

Cause of Fault:

 

·     Engine Off, ignition On.

       Disconnect plug from intake air temperature sensor P29

lower than - 35 °C / - 31 °F

greater than 4.9 V

·     Short circuit between signal and ground leads in wiring harness

·     Control unit K69 defective

 

 

·     Short - circuit both contacts in intake air temperature sensor plug using adapter lead from Electronic - Kit I KM - 609

greater than 180 °C / 356 °F

lower than 0.1 V

·     Lead interruption from

       -      control unit K69 / Ter. 6 to intake air temperature sensor P29 / Ter. 1

       -      intake air temperature sensor P29 / Kl .2 to ground

·     Control unit defective

 

 

Nominal values are attained

 

Checking values for intake air temperature sensor:

 

 

 

5000 - 2000 W

at + 10 °C / 50 °F to + 30 °C / 86 °F

 

·     Intake air temperature sensor P29 defective

 

 

 


Related Literature Units
-TABLE 2, TROUBLE CODES - Trouble Code 69 INTAKE AIR TEMP. VOLTAGE LOW
-

F0: DATA LIST - Test Step 08 COOLANT TEMP. > < F0: DATA LIST - Test Step 06 TRANSM. CODING