vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2: TROUBLE CODES - Trouble Code 92 CAMSHAFT SENSOR INCORRECT SIGNAL > < F2: TROUBLE CODES - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW

SIMTEC 56.1          F2: TROUBLE CODE TABLE

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

76

 

 

CONTINUOUS

TORQUE CONTROL

 

06, 14

 

 

·   Vehicle rolling

·   Ignition retard load reduction longer than 2.5 s

     (ignition retard load reduction too long)

·   Conditions must be fulfilled for at least 3 s

 

Effects:

·   The ignition retard load reduction is blocked for 10 s. If the fault occurs for the third time, the ignition retard load reduction is deactivated until "ignition OFF". If a valid ignition retard load reduction action occurs before the third incorrect attempt, the trouble - shooting counter is cleared and the ignition retard load reduction, signal is observed again.

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 06 TRANSM. CODING
-

F2: TROUBLE CODES - Trouble Code 92 CAMSHAFT SENSOR INCORRECT SIGNAL > < F2: TROUBLE CODES - Trouble Code 75 TORQUE CONTROL VOLTAGE LOW